About the Product
wallbuddies are handmade right here in Australia.All wallbuddies are :-
- made from pre-expanded styrene which contain no CFC’s
- painted with non toxic waterbased paint and assembled with a waterbased non toxic glue
- weatherproof under normal conditions
Installation
You’ll be amazed how quickly wallbuddies will transform your blank walls into a 3-D wonderland! Follow these simple steps to ensure you will have many years of Wall Buddies in your home.
- Please ensure the wall surface is clean, dry and free of dust (use a dry cloth to clean the surface prior to applying your products). If your walls have been recently painted, please allow approx 4 – 6 weeks drying time to allow the paint to cure before you attach anything to the walls.
- Take the products out of their plastic.
.
Spread them out on the floor near the wall you would like to put them – this will give you a basic idea of how you would like your mural to look. If you have lots of products to put up – take a quick digital or mobile phone photo to remember the layout. - Remove the double-sided tape protector and lightly tack each product to the wall and with a flat palm, gently press down around the edge of your product (where the tape is) to secure it in place.
HINT: You may even want to use some blu tack first to place your product in the right spots, so if you want to move them, it can be done quickly and easily before securing them in place with the tape.
Removal
If you ever want to take down any products, use a flat bladed knife, metal spatula, thin ruler etc and run it along the back of the product to remove it from the wall. If there is tape left on your wall, give it a rub with your thumb and it will peel off easily enough or gently apply some tea tree oil or heat from a hairdryer to soften the tape before removal.
You can order our light duty replacement tape from the website or by calling – 50 pieces for $4.50 and 100 pieces for $7.50 (inc postage).
HINT: Never Pull Your Products Away From The Wall.
Cleaning & Repairs
To remove any dust build up, we recommend that you use your hairdryer on a cool setting to blow off the dust or a damp sponge to gently lift the dust away.
If your products are situated outside, you can gently hose them off and allow to dry naturally.
If you happen to snap or clean break your Wall Buddies, they can be easily repaired using Selleys Aquadhere and touched up using any waterbased colour paints. Do not use superglue to enamel paint as this will damage the product.
We pride ourselves in making a quality Australian product. If you have a concern or any problems with your purchase, please contact us at with the details and we will be in touch to discuss a solution.
